CONTACT US TODAY!
(732) 349-5059
71 Irons Street, Toms River, NJ 08753

Tips On Furnace Repair And Causes Of Short Cycling

furnace repair in an Ocean Gate New Jersey homeAs cooler weather approaches, it is not uncommon for the heating system of your home to run more often. However, you may be experiencing something called “short cycling,” if your heater repeatedly clicks on and off. Point Bay Fuel is here to offer fast, affordable furnace repair to Ocean Gate NJ and the surrounding area residents.

By repairing a short cycling furnace…

you will receive many advantages. These include making sure your furnace does not require a replacement and it also prevents the need to pay higher than necessary energy bills. In this article, we will discuss some common reasons for short cycling.

Wrong Size HVAC System

If the problem occurs shortly after installation, it may simply mean that the unit is too big to heat your home. This problem is quite significant, as it will cause the indoor air to rapidly fluctuate between cold and hot. Subsequently, this causes the heating equipment to become trapped in a fast cycle of cooling and heating. This not only shortens the lifespan of your system, it also drives up your energy costs.

All homeowners want a furnace that quickly heats their dwelling during winter. The best way to do this is to ensure that your system is working efficiently. The technicians may have erred when measuring your home’s interior if your unit has been short cycling from its installation. This means that you must seek the advice of a heating contractor who can conduct a proper load evaluation exercise. They will verify whether or not your unit is the correct size.

 

Explore Our HVAC Installation Services

Overheating

furnace short cyclesAll heating systems in residential dwellings have safety mechanisms that monitor the surrounding temperature. The equipment turns off when there is a substantial risk of overheating.

Short cycling frequently takes place when a part called the heat exchanger overheats.

Once this part becomes too hot, an automatic switch will shut off the burner. Overheating is sometimes the result of the exchanger simply wearing out. It can also be a sign that it has developed cracks. This will also cause short cycling.

This is serious issue, as cracks in a heat exchanger can allow carbon monoxide to seep into your dwelling. This is hazardous or deadly. When you suspect the exchanger is damaged or that it is overheating, immediately call a professional HVAC technician. They will evaluate the entire system. They are qualified to determine what is wrong with the exchanger as well as provide the best solution.

 

Learn More About Our HVAC Services

Additional Causes

clogged furnace filterIn some cases, issues with short cycling are the result of a faulty thermostat as opposed to the actual HVAC unit. The best way to find out if this is the case is to have the heater tested. The placement of the thermostat also affects the way the furnace works. For example, when it is too close to another heat source, incorrect readings are registered. Consequently, this turns off the unit off .

A dirty unit with clogged filters can also result in short cycling, due to the accumulation of hot air inside the unit. The latter would eventually tell the furnace to turn off. Therefore, you should always make sure filters are clean and have your system tuned up on an annual basis by a qualified HVAC service company.

 

Explore Our Heater Maintenance Services
 

Corroded flame sensors are also a cause for concern. This simply means that rust has developed on the flame sensors in a gas furnace, which ultimately prevents it from functioning properly. Never attempt to clean the sensors yourself, as furnace repairs involve dealing with high voltages and flammable substances, which are issues for professionals.

 

Furnace Repair Ocean Gate NJ

nate certifiedIt may be tempting to try to convince yourself that short cycling is not a serious issue, particularly if your heating system is still working and you are not uncomfortable in your home. However, when your furnace cycles on and off frequently, a tremendous amount of stress is placed on various components of your HVAC unit. This includes the belts, the motor, and other parts. For this reason, it is best to have your system evaluated as soon as you notice there is an issue with short cycling. Reaching out to a reputable HVAC company in your neighborhood will ensure that problems are caught and fixed before minor issues become major.

For all of your heating needs, be sure to call Point Bay Fuel. We offer heating system repair, maintenance, and installations. Our NATE certified HVAC contractors can properly diagnose why your furnace is short cycling and find the most effective solution to repair it. Be sure to give us a call today to schedule an appointment.

 

Call Now: (732) 349-5059

 
We service Bayville NJ 08721, Beachwood NJ 08722, Island Heights NJ 08732, Lanoka Harbor NJ 08734, Lavallette NJ 08735, Normandy Beach NJ 08739, Ocean Gate NJ 08740, Pine Beach NJ 08741, Seaside Heights NJ 08751, Seaside Park NJ 08752, Toms River NJ 08753, and surrounding towns.
 
Explore Our HVAC Service Agreements

 
Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!